1. Measurement of each cylinder's delivery at various rotation speeds;
2. Checking of each cylinder's injection time with static state;
3. Checking of the mechanical speed governors;
4. Checking of the electromagnetic valve of distributor pumps;
5. Checking of the pneumatic speed governors' positive pressure performance;
6. Checking of the pneumatic speed governor's vacuum performance;
7. Measurement of the reflux delivery of distributor pumps;
8. Measurement of the distributor pump's body internal pressure;
9. Checking of sealing of fuel injection pump body;
10. Measurement of the advance angle.
>>>CHARACTERISTICS
1. Changing frequency changing rotation speed, low fall of rotation speed and high output torque;
2.Rotation speed, count, temperature, air pressure and advance angle are displayed in digits mode;
3. Seven kinds of rotation speeds presetting;
4. Built-in air resource;
5. Constant temperature controlled;
6. The functions of over voltage, overload and short circuit protection;
7. Operating position: arbitrary side of the two work sides of the test stand;
8. High measurement precision, ultra low noise.
>>>TECHNICAL PARAMETERS
|
Adjustable rotation speed range |
0~4000RPM |
|
Double series of graduates |
45CC, 150CC |
|
Volume of oil tank |
60L |
|
Temperature stabilization |
40±2℃ |
|
Test oil filtering unit |
5μ |
|
DC. Supply |
12/24V |
|
Feed pressure |
0~0.4MPa (low), 0~4MPa (high) |
|
Air pressure (MPa) |
-0.03~0.3 |
|
3-phase power supply |
380V/50Hz or on request |
|
Flywheel inertia's moment |
0.8kg·m2 |
|
Center height |
125mm |
|
Output power |
7.5kw, 11kw,15kw,18.5kw or on request |
|
Overall dimensions (mm) |
1800×960×1750 |
|
Net weight (kg) |
900 |
