LNG fuel metering valve test-bed, by Chen Lin company independent research and development, is the senior auto repair shop, car production manufacturers, automotive research department's preferred product excellence.

First, using range

1. The testing analysis of fuel metering valve working condition of the quality of the products;

2. Detection of fuel metering valve drip, Angle and spray pattern;

3. Test the fuel metering valve of fuel injection quantity, uniformity;

4. To have a blocking and faulty fuel metering valve for chemical cleaning and physical cleaning;

Three, matters needing attention:

1. Before using this machine, please read carefully the instructions and matters needing attention, after reading please keep it. The machine must be used by specially trained personnel, avoid the equipment failure caused by incorrect operation.

2. Must comply with the auto repair shop safety rules, pay special attention to the acid and alkali, oxygen, toxic around the influence caused by environmental factors such as high weight or damage.

3. The operational field environment around there is no fire or smoke, don't beside the instrument or put gasoline or other flammable substances are used. Indoor sunshine can't direct machine, at the same time equipped with dry powder fire extinguishers.

4. Have a variety of toxic compounds in engine exhaust gas (carbon monoxide, nitrogen compounds and hydrocarbons), should avoid inhaling, when operating vehicles should be parked in a well-ventilated place.

5. When the engine is running at higher temperature, should avoid contact with water tank and the exhaust pipe of high temperature components.

6. The power converter in order to meet safety standards to install leakage protector: chassis must be ground to work. Machine for long time work must be intermittent downtime, in order to ensure the service life of machine.

7. Such as when there is no add lotion in the ultrasonic tank, it is forbidden to start the ultrasonic system, otherwise it will three tube on the oscillation caused by open circuit board burn out.

8. Flammable items for test agent such as rubber water use is strictly prohibited.

9. Testing liquid and cleaning fluid secure product environmental protection, no pollution, no corrosion, contain patent formula by strengthening of liquid agent composition such as high efficient dispersant with extremely strong in addition to carbon deposition, in addition to the oil product function, does not damage parts, but they do not mix. Due to using other brands of testing liquid and cleaning fluid and the adverse consequences of users, manufacturers will not take any responsibility.

10. If you need the product use, performance, operation and maintenance consulting, please contact directly with the manufacturer.

11. Such as machine fault repair don't split open a case without authorization.

12. And the standard configuration to our packing list contents and number, product design and performance change, will not notice them one by one.

Fourth, the technical performance

1. Ability to work: real simulation fuel metering valve drip, atomization, angles, switch cycle, evenness

Automatic or select detection. The detection range: speed of 0-9975 / min; Fuel injection pulse width 0-1 ms; Would a scale of 0-9975 times. Speed is inversely proportional to the pulse width function relationship, working condition of dynamic observation of nozzle.

2. The unique way of detecting: random add, subtract model and simulation working condition of engine liters, slow down, load feedback signal, can be arbitrary in detect interrupt or set to restore the original routine work. Using the latest high precision would or timing test methods.

3. Cleaning system: it can detect for single and multiple fuel metering valve cleaning and ultrasonic cleaning.

4. Ultrasonic cleaning method:. Adopting the high frequency ultrasonic cleaning.

5. The fuel supply system: manual type adjustment, pressure stability.

6. Switch cycle dating: to determine the fuel metering valve switch shortest cycle, which can identify the quality of the fuel metering valve and differences.

7. The novel structure design: use of lightweight materials, high precision and capacity of the cylinder and the ambient light design of the latest technology.

Technical parameters 8.

Detection of cylinder number: 12

Fuel tank capacity: 8 l; Measuring cylinder capacity; 130 ml

Hydraulic system flow: 4 l/min system: 5.0 kg/cm

Power specifications: AC220v _ + 10 ﹪; 50 hz. 500 w.

Working environment: - 20 ° ~ 40 ° C - C; Relative humidity: < 85

Speed range: step length 25

Ultrasonic cleaning device: split type, form a complete set of standards